Single Row Ball Bearings

Contact Now

Single row deep groove ball bearings are the most widely used roller bearing type in the world due to their versatility and overall performance. They are characterized by having deep raceway grooves in which the inner and outer rings have circular arcs of slightly larger radius than that of the balls. They also have non-separable rings. Their straight forward basic design has many advantanges:Excellent for high speeds.Good radial load capacity.Acceptable axial load capacity in both directions.Have low torque capacity at startup and running speeds.Can operate with low noise.Require little maintenance

As flexible as the performance is, the configurations of single row ball bearnigs is also as versatile. These bearings often have steel shields or rubber seals installed on one or both sides and are pre-lubricated with grease. Also, snap rings are sometimes used on the outside edge. While many different retainers are available, pressed steel cages are most commonly used. Even tapered bores are available upon special order.

Bearing Number	Bore Dia	Outer DIa	Width	Size
EBC 6213 ZZ Single Row Ball Bearings	400 mm	720 mm	256 mm	6 mm
EBC 1620 ZZ Single Row Ball Bearings	NUP205ET7	1	52	17000
EBC 6215 ZZ C3 Single Row Ball Bearings	0.56	R155ZZS	1	7.938
EBC 1615 ZZ Single Row Ball Bearings	80 mm	130 mm	37 mm	29 mm
EBC 6008 ZZ C3 Single Row Ball Bearings	380 mm	680 mm	240 mm	6 mm
EBC 6008 C3 Single Row Ball Bearings	380 mm	620 mm	194 mm	5 mm
EBC 6007 C3 Single Row Ball Bearings	190 mm	320 mm	104 mm	3 mm
EBC 6209 C3 Single Row Ball Bearings	400 mm	650 mm	250 mm	6 mm
EBC 6007 ZZ C3 Single Row Ball Bearings	150 mm	250 mm	80 mm	2.1 mm
EBC 6207 C3 Single Row Ball Bearings	380 mm	620 mm	243 mm	5 mm
EBC 6202 ZZ C3 Single Row Ball Bearings	340 mm	520 mm	133 mm	5 mm
EBC 6010 C3 Single Row Ball Bearings	260 mm	360 mm	75 mm	2.1 mm