Self Aligning Ball Bearings

Contact Now

This type of ball bearing is recommended when alignment of the shaft and housing is difficult and the shaft may flex. The outer ring has a spherical raceway and its center of curvature coincides with that of the bearing; therefore, the axis of the inner ring, balls and cage can deflect to some extent around the bearing center. Pressed steel cages are usually used. Since the contact angle is small, the axial load capacity is low. The permissible dynamic misalignment is approximately 0.07 to 0.12 radian (4 to 7 degrees) under normal loads.
However, depending on the surrounding structure, such an angle may not be possible.

Bearing Number	Bore Dia	Width	Size
55 mm x 100 mm x 60 mm FAG 11211-TVH Self Aligning Ball Bearings	Mounted Cartridge Units	N/A	20.748
5 mm x 19 mm x 6 mm FAG 135-TVH Self Aligning Ball Bearings	Bearings	N/A	0
105 mm x 225 mm x 49 mm FAG 1321-M Self Aligning Ball Bearings	Ball Bearings	N/A	0
150 mm x 270 mm x 54 mm FAG 1230-M Self Aligning Ball Bearings	Single Row Ball Bearing	N/A	0
110 mm x 240 mm x 80 mm FAG 2322-M Self Aligning Ball Bearings	Bearings	N/A	2.4
NACHI 1307 C3 Self Aligning Ball Bearings	Plain Bearing Spherical Rod Ends	N/A	0.185
NACHI 1309 C3 Self Aligning Ball Bearings	Bearings	N/A	0
NACHI 1308K C3 Self Aligning Ball Bearings	Bearings	N/A	0
KOYO 1313C3 Self Aligning Ball Bearings	Bearings	N/A	0
KOYO 1310KC3 Self Aligning Ball Bearings	Bearings	N/A	0
KOYO 1214K Self Aligning Ball Bearings	Bearings	N/A	0.014
KOYO 1214KC3 Self Aligning Ball Bearings	Bearings	N/A	0