Single Row Ball Bearings

Contact Now

Single row deep groove ball bearings are the most widely used roller bearing type in the world due to their versatility and overall performance. They are characterized by having deep raceway grooves in which the inner and outer rings have circular arcs of slightly larger radius than that of the balls. They also have non-separable rings. Their straight forward basic design has many advantanges:Excellent for high speeds.Good radial load capacity.Acceptable axial load capacity in both directions.Have low torque capacity at startup and running speeds.Can operate with low noise.Require little maintenance

As flexible as the performance is, the configurations of single row ball bearnigs is also as versatile. These bearings often have steel shields or rubber seals installed on one or both sides and are pre-lubricated with grease. Also, snap rings are sometimes used on the outside edge. While many different retainers are available, pressed steel cages are most commonly used. Even tapered bores are available upon special order.

Bearing Number	Bore Dia	Outer DIa	Width	Size
EBC 6016 Single Row Ball Bearings	440 mm	620 mm	200 mm	5 mm
EBC 6304 C3 Single Row Ball Bearings	420 mm	760 mm	272 mm	7.5 mm
EBC 6012 ZZ C3 Single Row Ball Bearings	340 mm	580 mm	190 mm	5 mm
EBC 1601 ZZ Single Row Ball Bearings	85 mm	180 mm	60 mm	3 mm
EBC 6304 ZZ C3 Single Row Ball Bearings	NUP2313ET7	1	140	7500
EBC 626 ZZ BULK Single Row Ball Bearings	1	0	0	420
EBC 499502H Single Row Ball Bearings	380 mm	560 mm	135 mm	5 mm
EBC 1641 2RS BULK Single Row Ball Bearings	0.67	602ZZ	1	7
EBC 1635 2RS BULK Single Row Ball Bearings	240 mm	360 mm	118 mm	3 mm
EBC 1630 2RS BULK Single Row Ball Bearings	85 mm	180 mm	41 mm	mm
EBC 1621 2RS BULK Single Row Ball Bearings	260 mm	540 mm	165 mm	6 mm
EBC 1614 ZZ BULK Single Row Ball Bearings	340 mm	520 mm	180 mm	5 mm