Self Aligning Ball Bearings

Contact Now

This type of ball bearing is recommended when alignment of the shaft and housing is difficult and the shaft may flex. The outer ring has a spherical raceway and its center of curvature coincides with that of the bearing; therefore, the axis of the inner ring, balls and cage can deflect to some extent around the bearing center. Pressed steel cages are usually used. Since the contact angle is small, the axial load capacity is low. The permissible dynamic misalignment is approximately 0.07 to 0.12 radian (4 to 7 degrees) under normal loads.
However, depending on the surrounding structure, such an angle may not be possible.

Bearing Number Bore Dia Outer DIa Width Size
NSK 1204KJ Self Aligning Ball Bearings Bearings 0.0 N/A 0
NSK 1202TNC3 Self Aligning Ball Bearings Flange Block 0.0 N/A 4.994
NSK 1222KJ Self Aligning Ball Bearings Bearings 0.0 N/A 16.8
NSK 1210KTNC3 Self Aligning Ball Bearings Bearings 0.0 N/A 10.705
NSK 2312K Self Aligning Ball Bearings Spherical Plain Bearings - Rod Ends 0.0 N/A 0.01
NTN 2314 Self Aligning Ball Bearings Bearings 0.0 N/A 0.098
NSK 1206JS Self Aligning Ball Bearings Sleeve Bearings 34.0 N/A 0
NTN 2213C3 Self Aligning Ball Bearings Bearings 0.0 N/A 0
NTN 1205J Self Aligning Ball Bearings Flange Block 0.0 N/A 35.87
NTN 1204C4 Self Aligning Ball Bearings Pillow Block 0.0 N/A 8.308
NTN 1200J Self Aligning Ball Bearings Bearings 0.0 N/A 0.056
PT INTERNATIONAL 2322K Self Aligning Ball Bearings Bearings 0.0 N/A 16.8
12/30