Self Aligning Ball Bearings

Contact Now

This type of ball bearing is recommended when alignment of the shaft and housing is difficult and the shaft may flex. The outer ring has a spherical raceway and its center of curvature coincides with that of the bearing; therefore, the axis of the inner ring, balls and cage can deflect to some extent around the bearing center. Pressed steel cages are usually used. Since the contact angle is small, the axial load capacity is low. The permissible dynamic misalignment is approximately 0.07 to 0.12 radian (4 to 7 degrees) under normal loads.
However, depending on the surrounding structure, such an angle may not be possible.

Bearing Number	Bore Dia	Outer DIa	Width	Size
SKF 11205 TN9 Self Aligning Ball Bearings	Bearings	0.0	N/A	62.7
SKF 1200 ETN9/C3 Self Aligning Ball Bearings	Plain Bearings	0.0	N/A	0.144
SKF 2312/C4 Self Aligning Ball Bearings	Mounted Units & Inserts	0.0	N/A	2.088
SKF 2310 KM/C3 Self Aligning Ball Bearings	Flange Block	0.0	N/A	15.89
SKF 2310 KM Self Aligning Ball Bearings	Flange Block	0.0	N/A	0.68
SKF 2304 E-2RS1TN9/C3 Self Aligning Ball Bearings	Plain Bearing Spherical Rod Ends	0.0	N/A	0.117
SKF 2312/W64 Self Aligning Ball Bearings	Precision Ball Bearings	0.0	N/A	0.018
SKF 2311/W64 Self Aligning Ball Bearings	Bearings	0.0	N/A	0
SKF 2311 K/W64 Self Aligning Ball Bearings	Bearings	0.0	N/A	0
SKF 2310/C4 Self Aligning Ball Bearings	Sleeve Bearings	1.0	N/A	0
SKF 2310 M/C5S1 Self Aligning Ball Bearings	Take Up Units	0.0	N/A	2.388
SKF 2304 TN Self Aligning Ball Bearings	Needle Non Thrust Roller Bearing	10.0	N/A	0.044