Self Aligning Ball Bearings

Contact Now

This type of ball bearing is recommended when alignment of the shaft and housing is difficult and the shaft may flex. The outer ring has a spherical raceway and its center of curvature coincides with that of the bearing; therefore, the axis of the inner ring, balls and cage can deflect to some extent around the bearing center. Pressed steel cages are usually used. Since the contact angle is small, the axial load capacity is low. The permissible dynamic misalignment is approximately 0.07 to 0.12 radian (4 to 7 degrees) under normal loads.
However, depending on the surrounding structure, such an angle may not be possible.

Bearing Number	Bore Dia	Outer DIa	Width	Size
SKF 1206 EKTN9/W64 Self Aligning Ball Bearings	Bearings	0.0	N/A	0
SKF 1206 EKTN9/C3W64 Self Aligning Ball Bearings	Bearings	0.0	N/A	10.7
SKF 2305 E-2RS1TN9/C3 Self Aligning Ball Bearings	Sleeve Bearings	2.0	N/A	0
SKF 1201 ETN9/C2 Self Aligning Ball Bearings	Bearings	0.0	N/A	0
SKF 1205 EKTN9/C3W64 Self Aligning Ball Bearings	Self Aligning Ball Bearings	0.0	N/A	6.56
SKF 1204 ETN9/C3W64F Self Aligning Ball Bearings	Sleeve Bearings	2.0	N/A	0
SKF 1204 ETN9/C2 Self Aligning Ball Bearings	Bearings	0.0	N/A	0
SKF 1202 EM/C4S1VQ307 Self Aligning Ball Bearings	Sleeve Bearings	2.0	N/A	0
SKF 1204 EKTN9/C3 Self Aligning Ball Bearings	Bearings	0.0	N/A	0
SKF 1202 ETN9/C2 Self Aligning Ball Bearings	Needle Non Thrust Roller Bearing	3.0	N/A	0.636
SKF 1203 ETN9/W64 Self Aligning Ball Bearings	Bearings	0.0	N/A	1.3
SKF 1201 ETN9/W64 Self Aligning Ball Bearings	Bearings	0.0	N/A	0