Self Aligning Ball Bearings

Contact Now

This type of ball bearing is recommended when alignment of the shaft and housing is difficult and the shaft may flex. The outer ring has a spherical raceway and its center of curvature coincides with that of the bearing; therefore, the axis of the inner ring, balls and cage can deflect to some extent around the bearing center. Pressed steel cages are usually used. Since the contact angle is small, the axial load capacity is low. The permissible dynamic misalignment is approximately 0.07 to 0.12 radian (4 to 7 degrees) under normal loads.
However, depending on the surrounding structure, such an angle may not be possible.

Bearing Number	Bore Dia	Outer DIa	Width	Size
FAG 11307-TVH Self Aligning Ball Bearings	Bearings	0.0	N/A	0
FAG 11305-TVH Self Aligning Ball Bearings	Bearings	0.0	N/A	0
FAG 1326-K-M Self Aligning Ball Bearings	Bearings	0.0	N/A	148.09
FAG 1324-K-M Self Aligning Ball Bearings	Spherical Plain Bearings - Rod Ends	0.0	N/A	0.16
FAG 1322-M-C3 Self Aligning Ball Bearings	Bearings	0.0	N/A	0.037
FAG 1321-M-C3 Self Aligning Ball Bearings	Cam Followers Stud Type	52.0	N/A	0.073
FAG 1320-K-J Self Aligning Ball Bearings	Tapered Roller Bearings	0.0	N/A	0.78
FAG 1321-K-M Self Aligning Ball Bearings	Needle Non Thrust Roller Bearing	0.0	N/A	0.274
FAG 1320-J Self Aligning Ball Bearings	Angular Contact Ball Bearing	0.0	N/A	0
FAG 1319 Self Aligning Ball Bearings	Angular Contact Ball Bearing	0.0	N/A	0.126
FAG 1315-M-C2 Self Aligning Ball Bearings	Thrust Ball Bearings	0.0	N/A	0.015
FAG 1313-K-TVH Self Aligning Ball Bearings	Pillow Block	0.0	N/A	0.65