Single Row Ball Bearings

Contact Now

Single row deep groove ball bearings are the most widely used roller bearing type in the world due to their versatility and overall performance. They are characterized by having deep raceway grooves in which the inner and outer rings have circular arcs of slightly larger radius than that of the balls. They also have non-separable rings. Their straight forward basic design has many advantanges:Excellent for high speeds.Good radial load capacity.Acceptable axial load capacity in both directions.Have low torque capacity at startup and running speeds.Can operate with low noise.Require little maintenance

As flexible as the performance is, the configurations of single row ball bearnigs is also as versatile. These bearings often have steel shields or rubber seals installed on one or both sides and are pre-lubricated with grease. Also, snap rings are sometimes used on the outside edge. While many different retainers are available, pressed steel cages are most commonly used. Even tapered bores are available upon special order.

Bearing Number	Bore Dia	Outer DIa	Width	Size
EBC 6208 ZZ C3 Single Row Ball Bearings	440 mm	790 mm	280 mm	7.5 mm
EBC 6006 2RS C3 Single Row Ball Bearings	18.99	QJ320	1	0
EBC R20 Single Row Ball Bearings	170 mm	310 mm	110 mm	4 mm
NICE BALL BEARING 1616 DCTN Single Row Ball Bearings	Single Row	Open	Cylindrical Bore	45 mm
EBC R20-2Z Single Row Ball Bearings	420 mm	620 mm	150 mm	5 mm
GENERAL BEARING S-8607-88 Single Row Ball Bearings	1	0	0	140
EBC R12 2RS Single Row Ball Bearings	200 mm	280 mm	60 mm	2.1 mm
EBC R24 2RS Single Row Ball Bearings	420 mm	700 mm	280 mm	6 mm
EBC 6202 2RS C3 Single Row Ball Bearings	1	STF457KVS5951E	1	0
CONSOLIDATED BEARING 87607 Single Row Ball Bearings	320 mm	480 mm	121 mm	4 mm
CONSOLIDATED BEARING MR-104-ZZ Single Row Ball Bearings	NU2315EM	1	160	6700
CONSOLIDATED BEARING MR-148-ZZ Single Row Ball Bearings	280 mm	460 mm	180 mm	5 mm