Single Row Ball Bearings

Contact Now

Single row deep groove ball bearings are the most widely used roller bearing type in the world due to their versatility and overall performance. They are characterized by having deep raceway grooves in which the inner and outer rings have circular arcs of slightly larger radius than that of the balls. They also have non-separable rings. Their straight forward basic design has many advantanges:Excellent for high speeds.Good radial load capacity.Acceptable axial load capacity in both directions.Have low torque capacity at startup and running speeds.Can operate with low noise.Require little maintenance

As flexible as the performance is, the configurations of single row ball bearnigs is also as versatile. These bearings often have steel shields or rubber seals installed on one or both sides and are pre-lubricated with grease. Also, snap rings are sometimes used on the outside edge. While many different retainers are available, pressed steel cages are most commonly used. Even tapered bores are available upon special order.

Bearing Number	Bore Dia	Outer DIa	Width	Size
RIT BEARING 6802 2RS Single Row Ball Bearings	110 mm	200 mm	53 mm	46 mm
RIT BEARING 6201-2RS Single Row Ball Bearings	1	0	0	160
EBC 627 ZZ Single Row Ball Bearings	460 mm	760 mm	240 mm	7.5 mm
RIT BEARING 6028 2RS Single Row Ball Bearings	440 mm	650 mm	157 mm	6 mm
RIT BEARING 6017 ZZ Single Row Ball Bearings	35 mm	80 mm	31 mm	25 mm
EBC R12 Single Row Ball Bearings	190 mm	340 mm	92 mm	4 mm
EBC 6204 ZZ C3 Single Row Ball Bearings	220 mm	370 mm	120 mm	4 mm
EBC 6203 ZZ C3 Single Row Ball Bearings	200 mm	310 mm	109 mm	2.1 mm
CONSOLIDATED BEARING E-13 Single Row Ball Bearings	35 mm	72 mm	17 mm	1.1 mm
BOSTON GEAR 1641DC Single Row Ball Bearings	630 mm	1030 mm	315 mm	7.5 mm
CONSOLIDATED BEARING E-19 Single Row Ball Bearings	180 mm	320 mm	112 mm	4 mm
CONSOLIDATED BEARING E-9 Single Row Ball Bearings	140 mm	250 mm	68 mm	3 mm