Single Row Ball Bearings

Contact Now

Single row deep groove ball bearings are the most widely used roller bearing type in the world due to their versatility and overall performance. They are characterized by having deep raceway grooves in which the inner and outer rings have circular arcs of slightly larger radius than that of the balls. They also have non-separable rings. Their straight forward basic design has many advantanges:Excellent for high speeds.Good radial load capacity.Acceptable axial load capacity in both directions.Have low torque capacity at startup and running speeds.Can operate with low noise.Require little maintenance

As flexible as the performance is, the configurations of single row ball bearnigs is also as versatile. These bearings often have steel shields or rubber seals installed on one or both sides and are pre-lubricated with grease. Also, snap rings are sometimes used on the outside edge. While many different retainers are available, pressed steel cages are most commonly used. Even tapered bores are available upon special order.

Bearing Number	Bore Dia	Outer DIa	Width	Size
GENERAL BEARING 23216-88 Single Row Ball Bearings	NU2234EM	1	310	3200
GENERAL BEARING 22812-88 Single Row Ball Bearings	420 mm	620 mm	150 mm	5 mm
GENERAL BEARING 22610-88 Single Row Ball Bearings	NJ309EM	1	100	9000
CONSOLIDATED BEARING 6217 C/4 Single Row Ball Bearings	530 mm	780 mm	185 mm	6 mm
GENERAL BEARING 6003ZZ Single Row Ball Bearings	200 mm	360 mm	98 mm	4 mm
GENERAL BEARING 60012RS Single Row Ball Bearings	190 mm	260 mm	52 mm	2 mm
GENERAL BEARING 62022RS-5/8 Single Row Ball Bearings	460 mm	680 mm	163 mm	6 mm
GENERAL BEARING 62032RS-5/8 Single Row Ball Bearings	180 mm	320 mm	86 mm	4 mm
CONSOLIDATED BEARING WC88500 Single Row Ball Bearings	33.02	QJ340	1	0
CONSOLIDATED BEARING WC88007 Single Row Ball Bearings	Open	Cylindrical Bore	Single Row	2.100 kg
CONSOLIDATED BEARING WC87510 Single Row Ball Bearings	190 mm	400 mm	132 mm	5 mm
CONSOLIDATED BEARING WC87503 Single Row Ball Bearings	150 mm	270 mm	88.9 mm	2.3 mm