Self Aligning Ball Bearings

Contact Now

This type of ball bearing is recommended when alignment of the shaft and housing is difficult and the shaft may flex. The outer ring has a spherical raceway and its center of curvature coincides with that of the bearing; therefore, the axis of the inner ring, balls and cage can deflect to some extent around the bearing center. Pressed steel cages are usually used. Since the contact angle is small, the axial load capacity is low. The permissible dynamic misalignment is approximately 0.07 to 0.12 radian (4 to 7 degrees) under normal loads.
However, depending on the surrounding structure, such an angle may not be possible.

Bearing Number Bore Dia Outer DIa Width Size
SKF 2222 K/C3 Self Aligning Ball Bearings Flange Block 0.0 N/A 7.718
SKF 2213 E-2RS1TN9/C3 Self Aligning Ball Bearings Bearings 0.0 N/A 0.001
SKF 2319 M/C3 Self Aligning Ball Bearings Bearings 0.0 N/A 0.1
SKF 1304 K Self Aligning Ball Bearings Pillow Block 0.0 N/A 19.522
SKF 2317 K Self Aligning Ball Bearings Plain Bearings 0.0 N/A 0
SKF 2226 Self Aligning Ball Bearings Bearings 0.0 N/A 4.22
SKF 2214 K Self Aligning Ball Bearings Mounted Units & Inserts 0.0 N/A 0.572
SKF 1310/C5 Self Aligning Ball Bearings Flange Block 0.0 N/A 4.994
SKF 1214 K/C3 Self Aligning Ball Bearings Bearings 0.0 N/A 0
SKF 1214 K Self Aligning Ball Bearings Bearings 0.0 N/A 0
SKF 2306 M/C3 Self Aligning Ball Bearings Roller Bearings 0.0 N/A 0.21
SKF 2306/W64 Self Aligning Ball Bearings Bearings 0.0 N/A 0
15/30