Self Aligning Ball Bearings

Contact Now

This type of ball bearing is recommended when alignment of the shaft and housing is difficult and the shaft may flex. The outer ring has a spherical raceway and its center of curvature coincides with that of the bearing; therefore, the axis of the inner ring, balls and cage can deflect to some extent around the bearing center. Pressed steel cages are usually used. Since the contact angle is small, the axial load capacity is low. The permissible dynamic misalignment is approximately 0.07 to 0.12 radian (4 to 7 degrees) under normal loads.
However, depending on the surrounding structure, such an angle may not be possible.

Bearing Number Bore Dia Outer DIa Width Size
NTN 2302 Self Aligning Ball Bearings Angular Contact Ball Bearing 0.0 N/A 0
NTN 2302G15C3 Self Aligning Ball Bearings Precision Ball Bearings 0.0 N/A 4.764
NSK 2222KJ Self Aligning Ball Bearings Angular Contact Ball Bearing 0.0 N/A 0.23
NSK 2222J Self Aligning Ball Bearings Bearings 0.0 N/A 0
FAG 2310-M Self Aligning Ball Bearings Bearings 0.0 N/A 0
FAG 2310-K-2RS-TVH-C3 Self Aligning Ball Bearings Bearings 0.0 N/A 4.81
FAG 11504-TVH Self Aligning Ball Bearings Bearings 0.0 N/A 0
FAG 11507-TVH Self Aligning Ball Bearings Bearings 0.0 N/A 0
FAG 11508-TVH Self Aligning Ball Bearings Mounted Units & Inserts 0.0 N/A 0
FAG 11506-TVH Self Aligning Ball Bearings Bearings 0.0 N/A 0
FAG 11309-TVH Self Aligning Ball Bearings Mounted Units & Inserts 0.0 N/A 0.722
FAG 11308-TVH Self Aligning Ball Bearings Bearings 0.0 N/A 0.006
5/30