Self Aligning Ball Bearings

Contact Now

This type of ball bearing is recommended when alignment of the shaft and housing is difficult and the shaft may flex. The outer ring has a spherical raceway and its center of curvature coincides with that of the bearing; therefore, the axis of the inner ring, balls and cage can deflect to some extent around the bearing center. Pressed steel cages are usually used. Since the contact angle is small, the axial load capacity is low. The permissible dynamic misalignment is approximately 0.07 to 0.12 radian (4 to 7 degrees) under normal loads.
However, depending on the surrounding structure, such an angle may not be possible.

Bearing Number Bore Dia Outer DIa Width Size
FAG 1312-K-TVH Self Aligning Ball Bearings Mounted Units & Inserts 0.0 N/A 1.407
FAG 1311-M-C3 Self Aligning Ball Bearings Single Row Ball Bearing 0.0 N/A 0.061
FAG 1300-TVH Self Aligning Ball Bearings Angular Contact Ball Bearing 0.0 N/A 0.585
FAG 11510-TVH Self Aligning Ball Bearings Single Row Ball Bearing 0.0 N/A 0
FAG 1201-TVH-C4 Self Aligning Ball Bearings Pillow Block 0.0 N/A 31.326
FAG 1201-J-C4 Self Aligning Ball Bearings Bearings 0.0 N/A 30.1
FAG 1228-M-C3 Self Aligning Ball Bearings Bearings 0.0 N/A 14.551
FAG 1226-K-M Self Aligning Ball Bearings Cam Followers Stud Type 0.0 N/A 0.018
FAG 1224-K-M Self Aligning Ball Bearings Flange Block 0.0 N/A 7.264
FAG 2322K Self Aligning Ball Bearings Mounted Units & Inserts 0.0 N/A 28.141
FAG 1218-TVH-C5 Self Aligning Ball Bearings Precision Ball Bearings 0.0 N/A 0.032
FAG 1218-K-TVH-C4 Self Aligning Ball Bearings Single Row Ball Bearing 0.0 N/A 0
7/30