Single Row Ball Bearings

Contact Now

Single row deep groove ball bearings are the most widely used roller bearing type in the world due to their versatility and overall performance. They are characterized by having deep raceway grooves in which the inner and outer rings have circular arcs of slightly larger radius than that of the balls. They also have non-separable rings. Their straight forward basic design has many advantanges:Excellent for high speeds.Good radial load capacity.Acceptable axial load capacity in both directions.Have low torque capacity at startup and running speeds.Can operate with low noise.Require little maintenance

As flexible as the performance is, the configurations of single row ball bearnigs is also as versatile. These bearings often have steel shields or rubber seals installed on one or both sides and are pre-lubricated with grease. Also, snap rings are sometimes used on the outside edge. While many different retainers are available, pressed steel cages are most commonly used. Even tapered bores are available upon special order.

Bearing Number	Bore Dia	Outer DIa	Width	Size
EBC SS608 2RS Single Row Ball Bearings	320 mm	440 mm	90 mm	3 mm
EBC R8 ZZ BULK Single Row Ball Bearings	0.89	602XZZ	1	8
EBC R8 2RS BULK Single Row Ball Bearings	280 mm	420 mm	106 mm	4 mm
EBC R6 2RS BULK Single Row Ball Bearings	240 mm	360 mm	92 mm	3 mm
EBC R4 ZZ BULK Single Row Ball Bearings	120 mm	215 mm	40 mm	34 mm
EBC R4 2RS BULK Single Row Ball Bearings	80 mm	140 mm	33 mm	28 mm
EBC R3 2RS BULK Single Row Ball Bearings	240 mm	320 mm	60 mm	2.1 mm
EBC SS6008 2RS Single Row Ball Bearings	120 mm	215 mm	76 mm	2.1 mm
EBC SS6006 2RS Single Row Ball Bearings	300 mm	540 mm	140 mm	5 mm
EBC SS6004 2RS Single Row Ball Bearings	NJ216ET	1	140	8000
EBC SS6005 2RS Single Row Ball Bearings	240 mm	440 mm	120 mm	4 mm
EBC SS6003 2RS Single Row Ball Bearings	12.32	6313	1	140