Single Row Ball Bearings

Contact Now

Single row deep groove ball bearings are the most widely used roller bearing type in the world due to their versatility and overall performance. They are characterized by having deep raceway grooves in which the inner and outer rings have circular arcs of slightly larger radius than that of the balls. They also have non-separable rings. Their straight forward basic design has many advantanges:Excellent for high speeds.Good radial load capacity.Acceptable axial load capacity in both directions.Have low torque capacity at startup and running speeds.Can operate with low noise.Require little maintenance

As flexible as the performance is, the configurations of single row ball bearnigs is also as versatile. These bearings often have steel shields or rubber seals installed on one or both sides and are pre-lubricated with grease. Also, snap rings are sometimes used on the outside edge. While many different retainers are available, pressed steel cages are most commonly used. Even tapered bores are available upon special order.

Bearing Number	Bore Dia	Outer DIa	Width	Size
EBC R4A 2RS Single Row Ball Bearings	200 mm	310 mm	82 mm	2.1 mm
EBC R4 ZZ Single Row Ball Bearings	260 mm	400 mm	65 mm	4 mm
EBC 623 ZZ Single Row Ball Bearings	360 mm	540 mm	82 mm	6 mm
EBC 6209 2RS C3 Single Row Ball Bearings	70 mm	150 mm	51 mm	42 mm
EBC 1606 2RS Single Row Ball Bearings	2.9	EN10	1	28
EBC 6301 2RS C3 Single Row Ball Bearings	300 mm	500 mm	160 mm	5 mm
EBC 1628 2RS Single Row Ball Bearings	220 mm	300 mm	60 mm	2.1 mm
EBC 6211 2RS C3 Single Row Ball Bearings	95 mm	170 mm	32 mm	mm
EBC 6009 ZZ C3 Single Row Ball Bearings	NUP2306ET7	1	72	16000
EBC 628 ZZ Single Row Ball Bearings	180 mm	280 mm	74 mm	2.1 mm
EBC 634 ZZ Single Row Ball Bearings	40 mm	90 mm	90 mm	42 mm
NICE BALL BEARING 1654 DCTN Single Row Ball Bearings	Cylindrical Bore	Open	Double Row	Symmetric