Single Row Ball Bearings

Contact Now

Single row deep groove ball bearings are the most widely used roller bearing type in the world due to their versatility and overall performance. They are characterized by having deep raceway grooves in which the inner and outer rings have circular arcs of slightly larger radius than that of the balls. They also have non-separable rings. Their straight forward basic design has many advantanges:Excellent for high speeds.Good radial load capacity.Acceptable axial load capacity in both directions.Have low torque capacity at startup and running speeds.Can operate with low noise.Require little maintenance

As flexible as the performance is, the configurations of single row ball bearnigs is also as versatile. These bearings often have steel shields or rubber seals installed on one or both sides and are pre-lubricated with grease. Also, snap rings are sometimes used on the outside edge. While many different retainers are available, pressed steel cages are most commonly used. Even tapered bores are available upon special order.

Bearing Number	Bore Dia	Outer DIa	Width	Size
RIT BEARING 6905 2RS Single Row Ball Bearings	Cylindrical Bore	Open	Double Row	Symmetric
RIT BEARING 6904 ZZ Single Row Ball Bearings	30 mm	49.2 mm	12 mm	18.8 kN
RIT BEARING 6302 Single Row Ball Bearings	65 mm	110 mm	34 mm	26.5 mm
RIT BEARING 6006 2RSNR Single Row Ball Bearings	1	0	0	32
RIT BEARING R12ZZ Single Row Ball Bearings	110 mm	170 mm	38 mm	29 mm
RIT BEARING 6908 2RS Single Row Ball Bearings	280 mm	420 mm	106 mm	4 mm
RIT BEARING 6205 2RSNR Single Row Ball Bearings	55 mm	120 mm	43 mm	2 mm
RIT BEARING 6907 ZZ Single Row Ball Bearings	220 mm	400 mm	144 mm	4 mm
NICE BALL BEARING 1641 DCTN Single Row Ball Bearings	280 mm	380 mm	75 mm	2.1 mm
EBC 6307 2RS C3 Single Row Ball Bearings	55 mm	100 mm	21 mm	18 mm
GENERAL BEARING S8605-88 Single Row Ball Bearings	1	0	0	280
EBC 1623 2RS Single Row Ball Bearings	320 mm	480 mm	121 mm	4 mm