Single Row Ball Bearings

Contact Now

Single row deep groove ball bearings are the most widely used roller bearing type in the world due to their versatility and overall performance. They are characterized by having deep raceway grooves in which the inner and outer rings have circular arcs of slightly larger radius than that of the balls. They also have non-separable rings. Their straight forward basic design has many advantanges:Excellent for high speeds.Good radial load capacity.Acceptable axial load capacity in both directions.Have low torque capacity at startup and running speeds.Can operate with low noise.Require little maintenance

As flexible as the performance is, the configurations of single row ball bearnigs is also as versatile. These bearings often have steel shields or rubber seals installed on one or both sides and are pre-lubricated with grease. Also, snap rings are sometimes used on the outside edge. While many different retainers are available, pressed steel cages are most commonly used. Even tapered bores are available upon special order.

Bearing Number Bore Dia Outer DIa Width Size
EBC R6-2RS Single Row Ball Bearings 75 mm 115 mm 25 mm 19 mm
GENERAL BEARING 99R16 Single Row Ball Bearings 320 mm 540 mm 218 mm 5 mm
EBC 1635-2RS Single Row Ball Bearings 400 mm 600 mm 148 mm 5 mm
EBC 1620 2RS Single Row Ball Bearings 45 mm 85 mm 19 mm 1.1 mm
EBC R10 2RS Single Row Ball Bearings Open Cylindrical Bore Single Row 2.690 kg
EBC 6207 ZZ C3 Single Row Ball Bearings Tapered Bore Open Double Row Symmetric
EBC 1641 ZZ Single Row Ball Bearings Single Row Open Cylindrical Bore 50 mm
EBC 6001 ZZ C3 Single Row Ball Bearings 200 mm 340 mm 112 mm 3 mm
EBC R8 2RS Single Row Ball Bearings 1 0 0 340
EBC 6203 2RS C3 Single Row Ball Bearings 340 mm 580 mm 190 mm 5 mm
EBC 6300 ZZ C3 Single Row Ball Bearings 320 mm 580 mm 150 mm 5 mm
EBC 6201 2RS C3 Single Row Ball Bearings 380 mm 620 mm 194 mm 5 mm
12/29